eAG1
Programmable ECU

Flexible Control Platform
for Mobile Machinery

eAG1 is a high-performance programmable ECU designed for controlling agricultural machinery, equipment, off-highway vehicles, and heavy-duty applications.

The high number of inputs and outputs allows direct acquisition of analog, digital, and frequency sensors, as well as control of DC motors, electrohydraulic actuators, solenoid valves, and other loads on the machine.

The ARM® Cortex® M7 microcontroller, up to 550 MHz and supported by up to 2 MB of memory, enables the development of complex applications.

eAG1 integrates a Hardware Secure Module to support cybersecurity features and a hardware supervisor for power monitoring, watchdog management, and output shutdown in case of anomalies.

The development environment in C/C++ or with auto-generated code from Matlab® Simulink®, along with ESTE software libraries supporting the main mobile machinery protocols — including SAE J1939, CANopen, ISO 11783, UDS, and KWP2000 — helps reduce development time and simplify integration into the vehicle system.

Key Benefits

  • Easy to develop
    Ready-to-use libraries, open-source and royalty-free compilation environments
  • Flexible and scalable
    3 CAN buses, a wide range of I/O, and configurability make it suitable for various applications
  • Field upgradeable
    USB stick, standard UDS protocol over CAN, and ISO 11783-13 File Server enable updates in any condition
  • Rugged
    IP67 aluminum housing, electrical protections, output diagnostics, voltage and temperature monitoring

Operating Environment

eAG1 is designed as the main ECU for implements or as an auxiliary ECU for distributed control of in-cab loads or auxiliary functions on agricultural machinery.

Agriculture

  • seeders and planting machines;
  • spray booms and section control;
  • vineyard and orchard machinery;
  • fertilizer spreaders and distribution equipment.

Off-highway and special-purpose vehicles

  • telehandlers and earthmoving equipment;
  • construction and road maintenance machinery;
  • special vehicles and heavy-duty applications.

eAG1 can be supplied as a programmable platform in C/C++ or integrated with application firmware developed by ESTE based on the machine’s specifications.

Technical
Specifications

Power supply: 8–16 VDC, 20 A max
Dimensions: 206 x 148 x 40 mm
Enclosure: Die-cast aluminum
Weight: 630 g
IP rating: IP67 with connector mated
Temperature: -40 °C to 85 °C
Compliance: ISO 14982, ISO 13766, ISO 24882
Microcontroller: ARM® Cortex® M7 32-bit, up to 550 MHz
Memory: Internal flash (1 MB) + EEPROM (64 KB) + External flash (1 MB)
Safety: Watchdog with HSM (Hardware Secure Module) output shutdown
Communication: 3 x CAN/CAN-FD, 1 x USB 2.0 Host
Inputs: 15 x digital/frequency, 12 x analog 0–10/4–20 mA
PWM outputs: 8 x H-bridges or 16 x HSD, 2 A nominal
Auxiliary outputs: 2 x HSD at Vsupply, 4 x HSD at 5 V, sensor power supply
Connector: TE Connectivity AMP – 121 pin

Contact

Request information

Want to learn more about our services? Fill in the fields below and you will receive all the information you need.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
*
Email*